IBM ADSH 38.4TB FlashCore Module 4 for IBM FS7300
IBM ADSH is the 38.4 TB NVMe FlashCore Module 4 feature for the IBM FlashSystem 7300 FS7300 Model 4657-924. The IBM ADSH is the 38.4 TB NVMe FCM 4 provides hardware compression, encryption capabilities and FCM4 computational storage functions in a 2.5-inch module for supported IBM FlashSystems. The IBM ADSH 38.4 TB NVMe FlashCore Module 4 can be used for a supported capacity expansion or replacement after confirming your machine type, installed drive generation and IBM Storage Virtualize level. The IBM ADSH 38.4TB NVMe FlashCore Module FCM4 has 03JN350 03LG019 03LG015 03LG003 03LG016 part numbers and may also have IBM AHSH AGSH feature codes.
The corresponding 38.4 TB FCM4 feature are AHSH for the IBM FlashSystem 9500 FS9500 models 4983-AH8 4666-AH8 4666-UH8, and AGSH for the FlashSystem 5200 and FlashSystem 5300. These IBM FlashSystem feature codes are ordering codes for specific FlashSystem models. All IBM FlashSystems, FlashCore Modules, upgrades and replacement parts include warranty, free technical support and are eligible for IBM maintenance and support.
Note: A NVMe FlashCore Module 4 FCM4 can be intermixed with FlashCore Module 3 FCM3 in an array, but will be functionally equivalent to an FCM3 when intermixed. However in order for an NVMe FlashCore Module 4 FCM4 to achieve specific functionality and increased performance of FMC4, it must be in all FCM4 RAID array.
IBM AHSH 38.4 TB FCM4 specifications
| Manufacturer and generation | IBM FlashCore Module 4 FCM4 |
|---|---|
| Feature code | ADSH |
| Machine type and feature identifiers | IBM FS7300 4657-924 |
| Usable / Effective Capacity | 38.4 TB / 115.2 TB |
| Physical format and interface | 2.5-inch small form factor; NVMe |
| Part number | 03NK829 |
| 38.4 TB service FRU reference | 03LG019 03LG015, 03LG003, 03LG016 |
| Installation location | Supported NVMe control-enclosure drive bay |
Supported IBM FlashSystem models and ordering features
The following configurations are documented by IBM announcements and sales manuals. The table identifies the appropriate 38.4 TB FCM4 feature for each family. Compatibility remains subject to the supported software, firmware and array configuration.
| FlashSystem family | Control enclosure machine type and model | 38.4 TB FCM4 feature |
|---|---|---|
| IBM FlashSystem 9500 | 4983-AH8, 4666-AH8, 4666-UH8 | AHSH |
| IBM FlashSystem 7300 | 4657-924, 4657-U7D | ADSH |
| IBM FlashSystem 5300 | 4662-7H2 | AGSH |
| IBM FlashSystem 5200 | 4662-6H2, 4662-UH6 | AGSH |
Smaller FCM4 alternatives and equivalent feature codes
IBM documents four capacities in this FCM4 range. Choose the capacity and the feature code together. A smaller module is an alternative for an appropriately designed array; it is not automatically an acceptable replacement for a failed 38.4 TB member.
| Capacity | FlashSystem 9500 | FlashSystem 7300 | FlashSystem 5200 / 5300 |
|---|---|---|---|
| 4.8 TB | AHSE | ADSE | AGSE |
| 9.6 TB | AHSF | ADSF | AGSF |
| 19.2 TB | AHSG | ADSG | AGSG |
| 38.4 TB | AHSH | ADSH | AGSH |
Associated part numbers and service FRUs
| Capacity | Part number in IBM FCM release notes | Service FRU in IBM replaceable-units table |
|---|---|---|
| 4.8 TB | 03NK832 | 03JK992 |
| 9.6 TB | 03NK831 | 03LG001 |
| 19.2 TB | 03NK830 | 03LG010 |
| 38.4 TB | 03NK829 | 03LG019 |
Capacity, compression and FCM4 functionality
The 38.4 TB figure is the module's usable capacity rating, not the final capacity available to applications after RAID and system overhead. IBM's technical specification table distinguishes 46 TB of raw flash, 38.4 TB usable and 115.2 TB effective at an assumed 3:1 compression ratio. Effective capacity depends on the data; already compressed or encrypted workloads may deliver much less reduction. Do not size a purchase on an assumed compression ratio alone.
FCM4 adds computational storage capabilities that assist ransomware threat detection. An all-FCM4 RAID array and the appropriate software level are required for the enhanced functions. IBM's Redbooks identify IBM Storage Virtualize 8.6.3 as the minimum level for the described FCM4 ransomware features; check the currently supported release and drive firmware for your machine rather than treating that historical minimum as an upgrade recommendation.
Where IBM permits FCM3 and FCM4 in the same array, the FCM4 operates with FCM3 functionality. Adding one new module does not enable the enhanced FCM4 detection functions for that mixed array. Detection also needs an operational response and recovery plan; it is not a substitute for protected backups.
Can I replace an FCM3 with an FCM4?
IBM documents FCM4 replacement and expansion options for supported FCM3 configurations. The replacement must meet the enclosure, capacity, software and array requirements. A mixed-generation array retains FCM3-level functionality. IBM announcement AD24-0141: FCM3 replacement features.
What should I send for an AHSH quotation?
Send the enclosure machine type and model, the installed drive label, requested quantity, software level and whether the request is a failed-drive replacement, array expansion or new array. Include the capacity required after protection and your service requirements.
Contact Midland Information Systems to confirm the correct AHSH module and request a quote.