Enforcive Enterprise Security Suite
Software Upgrade for Enforcive Versions 8.3.X and higher - upgrading to Version 8.4.1
Including Policy Compliance Manager, Data Provider, OS400 Firewall, Encryption, Masking & Scrambling modules.

This page is for upgrading your IBM i to the latest Enforcive Enterprise Security version 8.4.1, from version 8.3 or higher.  Check the IBM i version, by looking at the bottom right corner of Enforcive GUI or by running this command (dspdtaara rmtfil/SAKVA).  Note: The GUI Client is backwards compatible with older versions, but the IBM i software is not.  Other important notes are stated in the detailed Upgrade Instructions, please read before proceeding!

IBM i Host upgrade file (8.4.1)  -  vsn8410_1 SHA1 Hash

PC GUI Client upgrade file (8.4.7 build 20210729)  -  Client-847 SHA1 Hash

OS400 Version/Release Support by Enforcive Version

Important Notes:  Do not start upgrade unless you can immediately END & restart QSERVER and QUSRWRK sub-systems after upgrade!  Contact your Midland Account Representative if you would like our no charge upgrade assistance or have any questions.  You can view all the Enforcive version enhancements and fixes at these links pertaining to this upgrade:  8.4.1, 8.4, 8.3.9, 8.3.8, 8.3.7, 8.3.6, 8.3.5, 8.3.4, 8.3.3, 8.3.2 and 8.3.1

Be sure to read and follow Enforcive's Operational Instructions required for any of the following tasks/events.  Note: Enforcive cannot be replicated to another system.  Enforcive must first be installed on the target system at the same version as source, then Enforcive can be replicated “AFTER” following the instructions for objects to exclude.

Backup Recovery & Disaster Recovery by Restoring from a Backup
High Availability & Disaster Recovery Software Requirements for MIMIX, Q/EDD, iTera, Vision, etc. - spreadsheet
Disaster Recovery & High Availability Switchover Steps (Role Swap) via HA/DR software
OS400 & Hardware Upgrades
Moving Enforcive from One IBM i to Another
System Name & IP Address changes

PTFs required for above operational tasks can be downloaded using these links:

sec-8102  (target - BSFHAROLC, not required for 8.3.9 and higher)
crtlog832  (target - Central Audit, for 8.3.1 and higher)  installation instructions
sec-9117_4  (target - SQL Audit 8.3.2 and higher)
sec-9214  (target - QHST History Log Data Provider)
sec-8136  (target - SQL Audit, not required for 8.4.0 and higher)
crtout832  (target - Data Provider, for 8.3.1 and higher)  installation instructions
enfca17  (source - CAINIT4, for 8.3 and 8.3.1)  installation instructions
crtrmtlog  (target - CRTRMTLOG program, for 7.2 to 8.3)  installation instructions

IFS Malware Protection with Enforcive File Server Exit Program and Multi-Factor Authentication (MFA)

Important Note:  If your system’s Serial Number, Model Number or Processor has changed, you will need a new license key.  If it is urgent, contact Precisely Support using contact options at the bottom of this page.  Perform the below steps and send the system output to your Midland Information Systems Account Representative or Precisely Support:

Run the following command:  CALL PGM(QLZARCAPI)
Press F1 on the message at the bottom of the screen, press F10 to display the full message and email the copy/paste or screenshot.

Updating or Adding New Enforcive License Keys

Logon to Green Screen with ENFORCE User ID, upon logon, you will be prompted to update your license > Press F10.  Copy/paste your new license code, and press F16 to apply.

To enter a license key for any optional module, tab over to the “System” menu and take option 4 for “Customer License Codes”.
Put a 2 next to the module, paste the license key, and press F16 to apply, not the enter key.
If you do not see your license key updated correctly in the following screen... do the process again, but use F16 this time.

Precisely Support:

Toll Free:  (800) 337-8214  Press 2 then 3 for Enforcive products
International:  +1 (949) 724-5465
Email:  This email address is being protected from spambots. You need JavaScript enabled to view it.
Customer Portal:  https://customer.precisely.com
Note:  Support needs to know your Enforcive version on IBM i, OS400 version/release and system serial number. If there is a Job Log and/or error message in the GUI, send this information as well.  This information helps us help you FASTER.

Enforcive Enterprise Security Suite
Version 8.4.1 New Installation
Includes Policy Compliance Manager, Data Provider, OS400 Firewall, Encryption, Masking & Scrambling

This page is for installing Enforcive Enterprise Security version 8.4.1, the files and instructions on this page are NOT FOR UPGRADING an existing Enforcive version. Please read installation instructions before beginning.

ServerSetup8.4.1

PC GUI Client upgrade file (8.4.7 build 20210729)

OS400 Version/Release Support by Enforcive Version

Important Notes: QSERVER and QUSRWRK sub-systems only need to be restarted if you activate Database Server and File Server exit programs, which can be done as a separate step at a convenient time. Contact your Midland Account Representative if you would like our no charge installation assistance or have any questions. After activating Database Server (for ODBC and JDBC applications) or File Server (for IFS protection), you must run the below commands afterwards. Other details are explained in the "installation instructions" provided above.

ENDSBS SBS(QSERVER) OPTION(*IMMED)
STRSBS SBSD(QSERVER)
ENDSBS SBS(QUSRWRK) OPTION(*IMMED)
STRSBS SBSD(QUSRWRK)
STRHOSTSVR SERVER(*DATABASE *FILE)
ENDHOSTSVR SERVER(*DTAQ)
STRHOSTSVR SERVER(*DTAQ)
STRTCPSVR SERVER(*NETSVR)
STRTCPSVR SERVER(*SSHD)

Be sure to read and follow Enforcive's Operational Instructions required for any of the following tasks/events.  Note: Enforcive cannot be replicated to another system.  Enforcive must first be installed on the target system at the same version as source, then Enforcive can be replicated “AFTER” following the instructions for objects to exclude.

Backup Recovery & Disaster Recovery (Restoring from a Backup)
High Availability & Disaster Recovery Software Requirements - spreadsheet
Disaster Recovery & High Availability Switchover Steps (Role Swap) via HA/DR software
OS400 & Hardware Upgrades
Moving Enforcive from One IBM i to Another
System Name & IP Address changes

PTFs required for above operational tasks can be downloaded using these links:

sec-8102  (target - BSFHAROLC, not required for 8.3.9 and higher)
crtlog832  (target - Central Audit, for 8.3.1 and higher)  installation instructions
sec-9117_4  (target - SQL Audit 8.3.2 and higher)
sec-9214  (target - QHST History Log Data Provider)
sec-8136  (target - SQL Audit, not required for 8.4.0 and higher)
crtout832  (target - Data Provider, for 8.3.1 and higher)  installation instructions

IFS Malware Protection with Enforcive File Server Exit Program and Multi-Factor Authentication (MFA)

Important Note:  If you need a license key, perform the below steps and send the system output to your Midland Account Representative:

Run the following command:  CALL PGM(QLZARCAPI)
Press F1 on the message at the bottom of the screen, press F10 to display the full message and email the copy/paste or screenshot.

Updating or Adding New Enforcive License Keys

Logon to Green Screen with ENFORCE User ID, upon logon, you will be prompted to update your license > Press F10.  Copy/paste your new license code, and press F16 to apply.

To enter a license key for any optional module, tab over to the “System” menu and take option 4 for “Customer License Codes”.
Put a 2 next to the module, paste the license key, and press F16 to apply, not the enter key.
If you do not see your license key updated correctly in the following screen... do the process again, but use F16 this time.

Precisely Support:

Toll Free:  (800) 337-8214  Press 2 then 3 for Enforcive products
International:  +1 (949) 724-5465
Email:  This email address is being protected from spambots. You need JavaScript enabled to view it.
Customer Portal:  https://customer.precisely.com
Note:  Support needs to know your Enforcive version on IBM i, OS400 version/release and system serial number. If there is a Job Log and/or error message in the GUI, send this information as well.  This information helps us help you FASTER.