Contact us for Pricing or Questions:      (888) 682-5335          *We Ship Worldwide
1825-8202 - IBM Power7 E4B, Dual-port 10 Gb HEA Daughter Card (F
IBM 5768 2-Port Gigabit Ethernet-SX PCI Express Adapter
IBM AS400 iSeries 5767-8202 - IBM Power7 E4B, 2-Port 10/100/1000 Base-TX Ethernet IBM Power7 8202-E4B (#5767) - 2-Port 10/100/1000 Base-TX Ethernet PCI Express AdapterThe IBM 2-Port .. Product #: 5767-8202

5767-8202 - IBM Power7 E4B, 2-Port 10/100/1000 Base-TX Ethernet

Brand: IBM AS400 iSeries
Model Number: 5767-8202

IBM Power7 8202-E4B (#5767) - 2-Port 10/100/1000 Base-TX Ethernet PCI Express Adapter

The IBM 2-Port 10/100/1000 Base-TX Ethernet PCI Express (PCIe) Adapter is a Full Duplex, dual ported, Gigabit Ethernet adapter designed with highly integrated components. This adapter can be configured to run each port at 10, 100, or 1000 Mbps data rates. The adapter interfaces to the system via a PCIe bus. It is PCIe x4 capable and conforms to the PCIe 1.0a standard. The adapter connects to a network using a 4-pair CAT-5 Unshielded Twisted Pair (UTP) cable for distances of up to 100m. AIX Network Install Manager (NIM) boot capability is supported with this adapter. The adapter conforms to the IEEE 802.3ab 1000Base-T standard. The adapter also supports jumbo frames when running at the 1000 Mbps speed.

A function called 'Large Send' or sometimes known as TCP Segmentation is also provided by this adapter. This function offloads the TCP segmentation operation from the AIX IP layer to the adapter for outgoing (transmit side) TCP segments. Another function known as "Checksum Offload" which offloads the TCP Checksum Operation or workload from the CPU to the adapter is also provided.

The IBM 2-Port 10/100/1000 Base-TX Ethernet PCIe Adapter (#5767) should be considered where maximum port density is required per I/O card slot. For a suggested maximum number of adapters taking performance into consideration, see the IBM System p PCI placement guide (SA76-0090) for information about the PCIe slots on your system unit.

Limitations: The 1000 Mbps speed is not supported in Half Duplex (HDX) mode.

Attributes provided: Two full-duplex 10/100/1000Base-TX UTP connections to Gigabit Ethernet LAN(s).

Attributes required: One available PCIe card slot

For 8202-E4B: (#5767)

Minimum required: 0

Maximum allowed: 24 (Initial order maximum: 24)

OS level required:

AIX Version 5.3 supported

AIX Version 6.1 supported

AIX Version 7.1 supported

IBM i 6.1 supported

IBM i 7.1 supported

SUSE Linux supported

Red Hat Linux supported

Refer to Software Requirements for specific O/S levels supported

Initial Order/MES/Both/Supported: Both

CSU: Yes

Return parts MES: No

Note:

Maximum of 4 in the CEC

System maximum of 24 -- 4 in CEC and 20 in 2 x #5802/ #5877