2053-8202 - IBM Power7 E4B, PCIe LP RAID & SSD SAS Adapter 3Gb
PCIe RAID & SSD SAS Adapter 3GB is a double-wide, short, PCIE-8x, Solid State Drive (SSD) module controller. Each adapter has four slots and each slot can hold a SSD feature modules. Two feature SDD modules are available. #1995 for AIX/Linux and #1996 for IBM i Initial orders require a minimum of 1 SSD feature module and can be increased to 2 or 4 modules. 3 SSD modules on one adapter is not supported. SSD modules must be either all #1995 or all #1996. There are no external ports and no cables of any type attach/connect to PCIe RAID & SSD SAS Adapter.
The PCIe adapter provides RAID 0, 5 or 6 is for AIX and Linux for SSD modules on the PCIe adapter. It provides RAID 5 or 6 for IBM i. Mirroring is supported on all OS types. If RAID 0 is used, the modules must be mirrored. The PCIe RAID & SSD SAS Adapter does not provide write cache.
SSD modules can not be added/removed/replaced until the PCIe adapter is removed from the PCIe slot.
Though the electronics are identical and there is one CCIN (57CD), there are three feature codes for the adapter: #2053 Low Profile non-cassette for use in CECs with low profile slots, #2054 non-cassette with tail stock for a full regular height PCIe slot, and #2055 with Blind Swap Cassette for use in #5802 or #5877 PCIe I/ O drawers. There are also #4367 and #4377 which are packages shipping five PCIe adapters and twenty SSD modules.
Attributes provided: PCIe RAID & SSD SAS Adapter 3Gb with 4 SSD slots
Attributes required: Two adjacent PCIe slots, each #2053 requires 1, 2 or 4 SSD #1995 or #1996
For 8202-E4B: (#2053)
Minimum required: 0
Maximum allowed: 2 (Initial order maximum: 2)
OS level required:
AIX Version 5.3 supported
AIX Version 6.1 supported
AIX Version 7.1 supported
IBM i 7.1 supported
SUSE Linux supported
Red Hat Linux supported
Refer to Software Requirements for specific O/S levels supported
IBM i 6.1.1 or later
Initial Order/MES/Both/Supported: Both
Return parts MES: No
Note: Only supported in the Rack-mount configuration VIOS attachment requires, version 2.2 or later
Write a reviewName:
Your Review:Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below: