Contact us for Pricing or Questions:      (888) 682-5335          *We Ship Worldwide
IBM AS400 iSeries 1905-8203 - 4 GB Single-Port Fibre Channel PCI-X 2.0 DDR Adapter The IBM Power6 8203-E4A (#1905) 4 GB Single-Port Fibre Channel PCI-X 2.0 DDR Adapter   Th.. Product #: 1905-8203

1905-8203 - 4 GB Single-Port Fibre Channel PCI-X 2.0 DDR Adapter

Brand: IBM AS400 iSeries
Model Number: 1905-8203

The IBM Power6 8203-E4A (#1905) 4 GB Single-Port Fibre Channel PCI-X 2.0 DDR Adapter

 

The 4 Gigabit Single-Port Fibre Channel PCI-X 2.0 DDR Adapter is a 64-bit address/data, short form factor PCI-X adapter with an LC type external fiber connector that provides single initiator capability over an optical fiber link or loop. With the use of appropriate optical fiber cabling, this adapter provides the capability for a network of high-speed local and remote located storage. The adapter will auto-negotiate for the highest data rate between adapter and an attaching device at 1 Gbps, 2 Gbps or 4 Gbps of which the device or switch is capable. Distances up to 500 meters running at 1 Gbps data rate, up to 300 meters running at 2 Gbps data rate, and 4 Gbps data rate up to 150 meters are supported between the adapter and an attaching device or switch. When used with IBM Fibre Channel storage switches supporting long-wave optics, distances up to 10 kilometers are capable running at either 1 Gbps, 2 Gbps, or 4 Gbps data rates.

 

The 4 Gigabit Single-Port Fibre Channel PCI-X Adapter can be used to attach devices either directly, or by means of Fibre Channel Switches. If attaching a device or switch with a SC type fiber connector(s), use of an LC-SC 50 Micron Fiber Converter Cable The IBM Power6 8203-E4A (#2456) or a LC-SC 62.5 Micron Fiber Converter Cable The IBM Power6 8203-E4A (#2459) is required.

 

There are two maximum quantities for High Bandwidth adapters, one for performance, and one for connectivity. Adapter performance may be limited by bandwidth constraints in a network. To maximize High Bandwidth adapter performance in the server the performance maximum quantity should not be exceeded. In applications where the end-to-end network cannot sustain high performance and or connectivity is more important than overall bandwidth performance the performance maximum quantity can be exceeded up to the connectivity maximum quantity.

 

Refer to the following IBM storage subsystem Web page for additional supported server attachment information for IBM devices.

 

http://www.ibm.com/servers/storage/product/ products_pseries.html

 

Consult with your IBM representative or Business Partner for additional information relative to any third party attachment.

 

Attributes provided: 1 Fibre Channel

Attributes required: 1 empty PCI or PCI-X 1.0 / 2.0 slot

For 8203-E4A: The IBM Power6 8203-E4A (#1905)

Minimum required: 0

Maximum allowed: 50 (Initial order maximum: 0)

OS level required: AIX 5.3 with the 5300-07 Technology Level or later. AIX 6.1 or later. SUSE LINUX Enterprise Server 10 SP1 for POWER Systems, or later. Red Hat Enterprise Linux for POWER, version 4.5, or later. Red Hat Enterprise Linux for POWER, version 5.1, or later.

Initial Order/MES/Both/Supported: Supported

CSU: Yes

Return parts MES: Does not apply

Note: Maximum of two allowed in CEC under AIX or Linux. System maximum of 50 under AIX or Linux. Not supported under IBM i.

 

 

(Available in Refurbished Condition Only as of October 24, 2008)

 

Each occurrence of this feature delivers 2 each 4GB Dimms for a total of 8GB of Memory (667 MHz, 1Gb DRAM). This is a special priced feature that can only be ordered in multiples of 4. The minimum result being 32 GB of memory in 8 (4GB) dimms. This feature must be ordered in quantities of 4. No other order quantities will be accepted.

 

Note: MES orders for feature number xxxx are available only for authorized IBM Business Partners certified for participation in the IBM Solution Delivery Integration (SDI) Program.

 

Attributes provided: Memory

Attributes required: DIMM slots

For 8203-E4A: The IBM Power6 8203-E4A (#4287)

Minimum required: 0

Maximum allowed: 4 (Initial order maximum: 4)

OS level required: AIX 5.3 with the 5300-07 Technology Level or later. AIX 6.1 or later. IBM i V5R4 with V5R4M5 machine code, or later. SUSE Linux Enterprise Server 10 SP1 for POWER Systems, or later. Red Hat Enterprise Linux for POWER, version 4.5, or later. Red Hat Enterprise Linux for POWER, version 5.1, or later

Initial Order/MES/Both/Supported: Both

CSU: Yes

Return parts MES: No