5783 - IBM PCI-X iSCSI HBA Copper
(#5783) - PCI-X iSCSI HBA Copper
This feature provides a 1Gbps copper iSCSI target HBA, which is used to connect to iSCSI initiator HBAs installed in selected System x models or IBM BladeCenter blade servers. The iSCSI connection is used to provide System i systems management, networking, and disk consolidation features to attached System x or blade servers using a 1Gbps Ethernet LAN.
#5783 uses an RJ45 Gigabit Ethernet connector and provides 1000Mbps connectivity over standard CAT-5e or CAT6 cables to support communications up to a distance of 100m. #5783 conforms to the iEEE 802.3ab 1000Base-T standard.
Attributes provided: Connection to target host bus adapter (HBA)
Attributes required: Available 3.3V slot
OS level required: i5/OS V5R4, or later
Write a reviewName:
Your Review:Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below: